|
Main Feature: When properly installed, it is almost impossible to tie anything around it
Dimensions: 3" height x 4" depth (2" top piece) x variable width
Material: 6063 T6 Aluminum
Installation: This item must be fastened securely so that it cannot be removed or loosened. Tamper-proof screws (not included) are recommended. As shown in the sketch (below - left), fasten the SP1 underneath the shelf or ceiling of a wardrobe closet. When viewed from the front as in the picture (below - right), the SP1 must be flush against the wall. Each piece must be individually and uniquely fitted so that no space is available in which to secure a cord.
Hangers: Restrict the number of hangers available to patient access. A tie around many hangers together may support a patient's weight. The break load of hangers should be tested to determine how many hangers can be safely distributed.
|
